Find Your Part:

Return to Parts List

Category : A- Small Block "LA" : Cylinder Heads, Aluminum : Edelbrock Victor : CNC Assembled w/ solid roller springs

EDE 61729




LOOKA, LOOKA HERE: Brand New Edelbrock Small Block victor JR Heads; Fully Ported

P/N HUG 61729

We purchased them in the good ol’ days before Hunter Biden’s father was President (4 years ago) to design Roller Rockers for them. We just found them hiding at the back of a shelf, so we want to clear the space.

They are new and complete, except for four missing valve springs – and they are no longer in their Edelbrock boxes.

$4,175/Pair, AVAILABLE NOW!!

Victor Series Cylinder Heads For S/B Chrysler (LA Engine) 

This part number is for one single head that has been CNC ported by Edelbrock. It is a fully assembled head that includes 2.15" intake and 1.60" exhaust valves, an Edelbrock valve job and springs sufficient for most solid roller camshafts.

These cylinder heads are for use on 1967-1991, 318-360 c.i.d. Chrysler LA engines. They feature fully CNC ported 58cc combustion chambers and have an intake port volume of 225cc. These cylinder heads are an in-line valve design incorporating a 16° valve angle (stock is 18°) for improved air flow and increased power levels over heavily ported stock versions. They also feature the Chrysler W5 bolt pattern and have raised exhaust ports. The intake port has also been raised approximately 3/4" and the flange has also been extended to accommodate a stock (race) intake manifold such as our Super Victor #2815. Finally, a 5.56" overall length valve (+0.600" from stock) and raised rocker cover permit larger port cross-sections than in the stock head. Four versions are available; bare, bare with valves, complete (for hydraulic/flat tappet cams and solid roller cams) and Pro Port Raw. End-seal spacers are provided.

  • Cylinder Head Specifications:
  • Combustion chamber volume: 58cc
  • Intake runner volume: 225cc
  • Exhaust runner volume: 62cc
  • Intake valve diameter: 2.15"
  • Exhaust valve diameter: 1.60"
  • Valve stem diameter: 11/32"
  • Valve guides: Manganese bronze
  • Deck thickness: 5/8"
  • Valve spring diameter: 1.55"
  • Valve spring maximum lift: .650"
  • Rocker stud: N/A
  • Guideplate: N/A
  • Pushrod diameter: 5/16"
  • Valve angle: 16°
  • Exhaust port location: Raised
  • Spark plug fitment: 14mm x 3/4 reach, gasket seat

    To view the flow chart for this head click the button below.



Home | Phone: 309-745-9558 | Email: