HUG SER9703ALN-14 SB HYD RLR CAM 197/203 -114šLSA NEW CORE LONG SNOUT & DRILLED FOR OILING WITH .317"/.323" LOBE LIFT $543.95
 NOTE: This cam is available for the 3.9 V6 and is a short snout cam.
V8 owners of this cam who have chassis dynoed their truck before and after installation of this cam report 23hp and 35 torque increase at 2000rpm and a peak gain of 25hp and 40 torque.
Hughes "SteamRoller" Cam
This is a long snout cam. If being used in a 93-03 Magnum engine you will need to use our HUG7011 Cam bolt & washer. Longer pushrods P/N 5258 will be required if you do not have adjustable rocker arms.
Hydraulic roller small block camshaft.
Basic guidelines (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Mild street, works well with all stock parts: spring upgrade required.
Vacuum: mid to high
Converter: Stock to mild stall
Rear gear: Stock
Benefits: Good towing cam. Works with stock computer
  
Related Parts:
Lifters: Magnum Blocks Standard performance use HUG 5006 High performance use HUG 5007
LA Blocks use HUG 5321
Spring Upgrade Kit: HUG 1199 - Includes HUG 1110P Valve Springs, HUG 1278 Retainers, and HUG 1307B Locks.
Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1110P
Valve Locks: For 5/16" stem use HUG 1307B
For 11/32" stem use HUG 1302 For 3/8" stem use HUG 1304
Retainers: For 5/16" stem use HUG 1278
For 11/32" stem use HUG 1202 For 3/8" stem use HUG 1252
Rocker Arm Kits: On Magnum iron heads use HUG 1550 or HUG 1555
On Magnum Edelbrock Heads use HUG 1560 or HUG 1555A
On standard LA style heads use 1.5 ratio HUG 15023 For 1.6 ratio use HUG 15063
Cam Key: HUG 7542
Cam bolt & washer: HUG 7011
Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442 | 
;void(0);)