HUG SER1418ALN-14 SB HYD RLR CAM 214/218 -114šLSA NEW CORE LONG SNOUT & DRILLED FOR OILING WITH .333"/.337" LOBE LIFT $543.95
 This is a long snout cam. If being used in a 93-03 Magnum engine you will need to use our HUG7011 Cam bolt & washer.
Hughes "SteamRoller" Cam
This is a long snout cam. It works fine in the 93-03 Magnum engine but you will need to use our HUG7011 Cam bolt & washer and the Hug 7542 cam key (see below in Related Parts). Longer pushrods P/N 5258 will be required if you do not have adjustable rocker arms.
Hydraulic roller small block camshaft.
Basic guidelines (These are not absolutes, just guidelines to help you get close on a cam choice)
Use: Mild street, works well with stock heads and upgraded throttle body
Idle: Smooth
Vacuum: mid to high
Converter: Stock to mild stall
Rear gear: Stock to 3.55
Benefits: Good supercharger cam
A tuner will help, but is not required
  
Related Parts:
Lifters: Magnum Blocks Standard performance use HUG 5006 High performance use HUG 5007
Spring Upgrade Kit: HUG 1199 - Includes HUG 1110P Valve Springs, HUG 1278 Retainers, and HUG 1307B Locks.
Valve Springs: For 1.5 or 1.6 ratio rockers use HUG 1110P
Valve Locks: For 5/16" stem use HUG 1307B
Retainers: For 5/16" stem use HUG 1278
Rocker Arm Kits: On Magnum iron heads use HUG 1550 or HUG 1555
On Magnum Edelbrock Heads use HUG 1560 or HUG 1555A
Cam Key: HUG 7542
Cam bolt & washer: HUG 7011
Timing Chain & Gear Set: 3 key way use HUG 6440 or for a 7 keyway use HUG 6442 | 
;void(0);)